Motorcycle Decals Stickers - Decorative Stripes / Rally Stripes - Pinstripes Stickers
It shines and sparkles - finally, after many weeks or maybe even months of construction, the finished bike is standing in the garage in all its beauty. But something is still missing, the last dot on the i. The curves on the tank do not really want to show to advantage. With a racing bike the sportiness could be expressed even better. So is good advice expensive here? No, not at all! The solution is very simple: spice up the design of your bike quickly, easily and inexpensively with decorative strips and rally stripes from the TECbike Online Shop. With us you get
t- Decorative stripes,
t- Racing Stripes and
t- Rally Stripes
in different colours. Viper stripes are a particularly sporty eye-catcher for the machine. All products convince with easy handling and high adhesive strength.
Stick on Tuning Stripes like a pro
In our online shop you can get pinstripes or racing stripes matching your design in the colours black, blue, red and in widths from 3 mm to 10 mm. Of course the stripes should last long and keep their attractive appearance. Therefore it is important to focus on quality when buying.
The film of our Racing Stripes has been specially developed for outdoor use. This means that it is not only very resistant to the effects of the weather. Even operating fluids such as oil or petrol cannot harm it. If you take your optically tuned motorcycle for a trip to the sea, you don't have to fear that sea water and salty air will damage the stickers. Therefore the racing stripes are not only suitable for the optical upgrading of the bike. They can also embellish your car or boat.
How to glue pinstripes
The same applies here as for large-area stickers: Before you apply the flexible tape to your motorcycle, it is important to prepare the surface properly.
Decorative strips are particularly often used for the rim area. Without much effort you can use them to add a fresh color accent to your bike. Glued onto the tank or fairing, you can highlight the contours of your bike individually. Although the application of endless strips, as you can get them in our shop, requires a little more craftsmanship, this task can also be easily mastered by untrained users. You are looking for preformed rim stickers? Also for this case we have a suitable selection in our online assortment.
Step 1
The right ambient temperature is one of the most important prerequisites for a good working result: In cold weather the adhesive strips become stiff. Therefore the ambient temperature should be at least 15°C. If you have a heater within reach, you can warm up the strip a little bit in addition to the radiator. This makes the material even more supple.
The area where the racing stripes are applied must be freely accessible. If you want to use the pinstripes as rim stickers, make sure that the wheel can be turned freely. The best way to do this is to place the bike securely on suitable workshop decals for the rear and front. A clean surface is also important. With a large piece of cardboard or a board as a base you can protect the surface from possible cleaning residues or similar.
Step 2 - individual tuning with high-quality adhesive strips
For an optimal hold of the trim strips, the glued areas must be 100% clean and free of grease. Thorough cleaning is therefore essential. Brake cleaners, citrus cleaners or special cleaning cloths are suitable for this purpose. A silicone remover from the paint shop can also be used for this. Especially at the rear wheel it is important to remove all chain grease residues.
An applicator is helpful for gluing to the rim base. With its help you can easily follow the curve of the rim. Now remove the protective foil only a little bit from the backside to apply the strip carefully in the desired position. Press the last glued area carefully with your thumb.
When used as rim strip: Once the strip has returned to the starting point, cut it off cleanly at a 90 degree angle. Make sure that both ends overlap slightly.
Once you have positioned the racing stripes, for example in elegant black and shiny, in the desired places, you should press the stripes firmly against the surface once again. This is best done with a microfiber cloth that you wrap around your index finger.
Do you have questions about our products? Then talk to us, we are happy to be there for you!
Motorcycle Decals Stickers - Decorative Stripes / Rally Stripes - Pinstripes Stickers It shines and sparkles - finally, after many weeks or maybe even months of construction, the finished bike is...
read more » Close window Motorcycle Decals Stickers - Decorative Stripes / Rally Stripes - Pinstripes Stickers
It shines and sparkles - finally, after many weeks or maybe even months of construction, the finished bike is standing in the garage in all its beauty. But something is still missing, the last dot on the i. The curves on the tank do not really want to show to advantage. With a racing bike the sportiness could be expressed even better. So is good advice expensive here? No, not at all! The solution is very simple: spice up the design of your bike quickly, easily and inexpensively with decorative strips and rally stripes from the TECbike Online Shop. With us you get
t- Decorative stripes,
t- Racing Stripes and
t- Rally Stripes
in different colours. Viper stripes are a particularly sporty eye-catcher for the machine. All products convince with easy handling and high adhesive strength.
Stick on Tuning Stripes like a pro
In our online shop you can get pinstripes or racing stripes matching your design in the colours black, blue, red and in widths from 3 mm to 10 mm. Of course the stripes should last long and keep their attractive appearance. Therefore it is important to focus on quality when buying.
The film of our Racing Stripes has been specially developed for outdoor use. This means that it is not only very resistant to the effects of the weather. Even operating fluids such as oil or petrol cannot harm it. If you take your optically tuned motorcycle for a trip to the sea, you don't have to fear that sea water and salty air will damage the stickers. Therefore the racing stripes are not only suitable for the optical upgrading of the bike. They can also embellish your car or boat.
How to glue pinstripes
The same applies here as for large-area stickers: Before you apply the flexible tape to your motorcycle, it is important to prepare the surface properly.
Decorative strips are particularly often used for the rim area. Without much effort you can use them to add a fresh color accent to your bike. Glued onto the tank or fairing, you can highlight the contours of your bike individually. Although the application of endless strips, as you can get them in our shop, requires a little more craftsmanship, this task can also be easily mastered by untrained users. You are looking for preformed rim stickers? Also for this case we have a suitable selection in our online assortment.
Step 1
The right ambient temperature is one of the most important prerequisites for a good working result: In cold weather the adhesive strips become stiff. Therefore the ambient temperature should be at least 15°C. If you have a heater within reach, you can warm up the strip a little bit in addition to the radiator. This makes the material even more supple.
The area where the racing stripes are applied must be freely accessible. If you want to use the pinstripes as rim stickers, make sure that the wheel can be turned freely. The best way to do this is to place the bike securely on suitable workshop decals for the rear and front. A clean surface is also important. With a large piece of cardboard or a board as a base you can protect the surface from possible cleaning residues or similar.
Step 2 - individual tuning with high-quality adhesive strips
For an optimal hold of the trim strips, the glued areas must be 100% clean and free of grease. Thorough cleaning is therefore essential. Brake cleaners, citrus cleaners or special cleaning cloths are suitable for this purpose. A silicone remover from the paint shop can also be used for this. Especially at the rear wheel it is important to remove all chain grease residues.
An applicator is helpful for gluing to the rim base. With its help you can easily follow the curve of the rim. Now remove the protective foil only a little bit from the backside to apply the strip carefully in the desired position. Press the last glued area carefully with your thumb.
When used as rim strip: Once the strip has returned to the starting point, cut it off cleanly at a 90 degree angle. Make sure that both ends overlap slightly.
Once you have positioned the racing stripes, for example in elegant black and shiny, in the desired places, you should press the stripes firmly against the surface once again. This is best done with a microfiber cloth that you wrap around your index finger.
Do you have questions about our products? Then talk to us, we are happy to be there for you!
