Motorcycle license plate holder

As a vehicle owner, you are obliged to attach a license plate to your bike. A license plate holder is usually already fitted to the motorcycle at the factory. However, if you want to give your bike an individual look, you will find a large selection for all common motorcycle brands and types in our motorcycle accessories store.

It is important that your license plate holder complies with legal regulations. Of course, we would prefer to ride around without the annoying "cake plates". On the other hand, we don't want to fall foul of the law either. That's why the number plate must be attached to the well-shaped back of your bike. Your license plate must be clearly visible and firmly attached at all times. Misuse, such as hiding the license plate, is illegal and can lead to penalties.

Do license plate holders on motorcycles have to be registered?

If you are getting a new license plate holder for your motorcycle, there are a few important things to bear in mind so that you don't get into trouble:

Technical regulations:

• Your license plate must be mounted at a specific angle and at a prescribed height. It must not be covered or mounted at an angle that makes it difficult to read.
• Avoid sharp edges or protruding parts on the holder that could jeopardize safety.

Obligation to register:

• Simple license plate holders without additional functions are generally not subject to registration as long as they comply with the legal requirements.
• If the license plate holder has additional features such as integrated lighting or special blinker brackets, these parts may need to have type approval or be approved by a testing organization such as TÜV or DEKRA.

Testing and approval:

• Modifications to the motorcycle that may affect road safety must be approved by a testing organization. This also applies to the license plate holder if it is fitted to the bike in combination with other modifications.

Penalties for non-compliance:

• An unapproved or incorrectly fitted license plate holder can result in a fine and, in the worst case, a point in Flensburg. In addition, the operating license for your motorcycle may expire, which means that you are no longer legally allowed to ride on public roads.

So it's best to check carefully beforehand whether your new license plate holder complies with the regulations and have it approved if necessary. This will keep you on the safe side and avoid trouble. You can find more information from the ADAC or testing organizations such as TÜV or DEKRA.

Motorcycle license plate holder 180 x 200 mm

Many people opt for the 180 x 200 mm size for their motorcycle license plate, and there are several good reasons for this. Here are the most important ones:

Compact size: the 180 x 200 mm dimensions are compact and fit most motorcycles well. They offer enough space to display all the necessary information legibly without appearing too large and bulky. This size blends in better with the overall appearance of the motorcycle.

Appearance and aesthetics: Many motorcyclists attach great importance to the aesthetics of their bike. A smaller license plate often looks sportier and more stylish. It disturbs the design and lines of the motorcycle less, which is particularly important for sporty and custom bikes.

Legal requirements:

The 180 x 200 mm size meets the legal requirements for license plates in Germany. It is large enough to clearly display all the prescribed information (such as the letter and number combination, the registration date and the license plate of origin), which ensures legibility by other road users and monitoring systems.

Practicality:

A smaller license plate holder is lighter and easier to mount. There are fewer problems with mounting on different types of motorcycles as the brackets are flexible and customizable. This also makes it easier to integrate additional components such as rear lights or indicators.

Are short license plates allowed on motorcycles?

Since April 2011, license plates have been issued for motorcyclists in widths of 180, 200 and 220 millimetres and a height of 200 millimetres. A short license plate looks nicer, especially if you want to keep your rear end clean. You can therefore easily exchange your old large motorcycle license plate for a new short one. Please bear in mind that on the particularly narrow plates, which are only 180 millimetres wide, there can be no more than two digits for two letters, i.e. no more than four characters after the registration district. For longer combinations, you therefore have to use a larger width. For example, if you want to exchange a combination with six digits after the city abbreviation, you will receive a new, shorter license plate combination. Reason: Even with the 220 millimeter wide new license plate, a maximum of five digits in total are possible behind the location abbreviation.

Folding motorcycle license plate holder

A folding motorcycle license plate holder can be useful in various situations and offers you both aesthetic and practical advantages. But beware: In normal road traffic in Germany, the license plate must always be clearly visible and firmly attached. If you misuse the folding license plate holder, for example to avoid speed measurements on public roads, this is illegal and can lead to considerable penalties.

Here are some reasons why you might consider a folding license plate holder:

Better looks:

If the look of your motorcycle is important to you, a folding license plate holder can help accentuate your bike's sleek and sporty design. You can retract the license plate when needed and not disrupt the lines of your bike.

Race track:

On the racetrack, license plates do not have to be carried. With a folding holder, you can quickly remove or fold up the license plate when you go to the racetrack. This way, your motorcycle remains ready to race without you having to remove the license plate completely.

Protection from damage:

When transporting your motorcycle or parking it in tight garages, the license plate can easily be damaged. A folding license plate holder allows you to fold up the license plate and protect it from knocks and scratches.

Competitions and shows:

At motorcycle competitions and shows, you probably want to show off your bike at its best. A folding license plate holder can enhance the look of the motorcycle by folding the license plate for the presentation.

License plate holder for motorcycle season plates

By automatically specifying the seasonal period, you can ensure that your motorcycle is ready for use in the best months for you, while saving costs and minimizing administrative work. When applying for a seasonal license plate, you specify the desired months in which your motorcycle should be registered. This information is then permanently noted on the license plate and can be used again every year without you having to reapply for it each time or apply for a new license plate.

According to legal regulations, seasonal license plates can also be issued as short license plates. You should always bear in mind that by specifying the months, additional space is required on the license plate. There is therefore less space available for the desired combination. Furthermore, there is usually no entitlement to a smaller license plate.

What does the type designation IQ mean on the license plate holder for motorcycles?

Q1

This stands for a simple license plate holder without many extras. Ideal for anyone who just wants the bare essentials. No frills, but it does the job.

IQ2

Here you get a little more comfort and functionality. The IQ2 usually has additional adjustment options so that you can better adjust your license plate, for example for an optimum angle of inclination.

IQ4

The IQ4 is a class above. It offers even more flexibility and customization options. Ideal if you not only want to mount your license plate, but also align it perfectly.

IQ5

With the IQ5, things get really classy. This holder often comes with special materials and a particularly high-quality finish. Good if you not only have functionality in mind, but also looks.

IQ6

The IQ6 goes in the direction of professional equipment. Here you usually have extended features such as integrated lighting, particularly robust construction and perhaps even anti-theft protection.

IQ7

This is the premier class. The IQ7 offers every conceivable extra: adjustment options, high-quality materials, lighting, protection against theft and often a particularly slim design. Perfect for anyone who wants the best of the best.

These labels will help you find the right license plate holder for your motorcycle, depending on your needs and preferences. Whether you just need a simple holder or the full professional equipment - there is something for everyone here.

Motorcycle license plate holders in the accessories store at TecBike

Our motorcycle license plate holders are available with and without rear light. All models are characterized by high quality and careful workmanship. The holders are also easy to fit. To ensure a long service life and maximum durability, only high-quality materials such as stainless steel or aluminum are used. A high-quality powder coating protects the metal from the effects of the weather and effectively prevents corrosion. In addition to the actual holder, the scope of delivery also includes a reflector with license plate light and the necessary mounting material. Approval by the TÜV or an ABE are just as unnecessary as registration in the papers.

Fitting the motorcycle license plate holder

To install a license plate holder on your motorcycle, all you need are suitable tools and a little manual dexterity. The license plate holder from our store can usually be fitted without having to cut into any parts of the fairing.

Before you start the conversion work, it is important to read the instructions thoroughly. While a four-wheeled vehicle can stand on its own, this is not the case with a two-wheeler. It is therefore important to ensure that the bike stands securely and firmly. An assembly stand from our store makes your work easier and reliably prevents your bike from falling over.

As a general rule, all parts and bolts must be checked to ensure they are tight. Furthermore, a check must be carried out for sufficient clearance, tightness and function in the unloaded and loaded state. To prevent bolts from loosening on their own, they must be secured with a suitable threadlocker. We recommend that you only carry out this work once you have completely fitted the bracket.