Adapter & holder for motorcycle turn signals
Seeing and being seen - in road traffic this plays a very important role. When it's dark, front and rear headlights make sure you have a good view of the road. This enables you to assess the traffic situation quickly and correctly. Other road users also perceive you better through the lighting on your bike. While the headlights and taillights are always in action, the indicators are only used to indicate a change of lane or direction of travel. They are therefore essential components on every motor vehicle. However, the standard models do not always meet the optical requirements. Therefore we offer you different variants for conversion. And so that everything fits correctly, you will also find the matching indicator adapters in our range.
Motorcycle turn signals - which regulations apply?
The StVZO contains some regulations which must be fulfilled by turn signals. If you own a bike that was first registered after January 1, 1962, it requires four turn signals - known as direction indicators in the technical language.
It is important that other road users can easily see the flashing signal. For this reason, the German Road Traffic Licensing Regulations (StVZO) specify very clear dimensions for installation. Motorcycle turn signals may be installed at a height between 350 mm and 1,200 mm above the road surface. A distance of at least 340 mm must be allowed between the two indicators. The minimum distance between rear indicators is 240 mm.
If you use so-called ox eyes at the handlebar ends, rear indicators are also required on current motorcycles.
Original or accessory turn signals - which model is it allowed to be?
Usually the selection of the motorcycle turn signals is made according to optical aspects. In our shop you can get accessory turn signals in many shapes and from different materials.
If it comes to a defect in the turn signal system, you can choose a suitable replacement from us. The offer ranges from indicator glass to complete accessory indicators. Here it is important to pay attention to the mounting method. Is the direction indicator embedded in the fairing or can it only be mounted using a special mounting device? Many turn signal models in our shop can be used universally and across brands. If you want to replace all front and rear turn signals on your bike right away, we recommend buying a set. You can find suitable mountings and adapters in our shop.
From classic to sporty - accessory indicators & the right indicator mounting
Pilots of retro-style machines, choppers or cruisers often prefer round and large housing shapes for the direction indicators. But also models with a chrome-plated and pointed housing are real eye-catchers with which you can set great accents.
A sporty look goes well with touring and racing machines. So-called mini-flashers fit harmoniously into the design of the machine and are very inconspicuous when switched off. The appearance of the vehicle and your personal taste decide whether you prefer chrome-plated models or indicators completely in black. Elongated and triangular mini variants in carbon look additionally emphasize the sportiness of your motorcycle.
Almost indestructible and fully in trend - LED flashers from TecBike
No matter whether it concerns sporty mini indicators or whether it should be models in the hip retro look: As illuminants LEDs are very trendy. They are economical in energy consumption, very small and offer an optimal light output. And so that the change from the original to the accessory version from our range is easy, you will find robust and durable turn signal adapters.
License plate holders, which are combined with direction indicators, kill two birds with one stone. They meet the legal requirements and are optical highlights. Even if you prefer a very puristic and clean look on your bike, our range offers you a suitable selection for this as well.
Turn signal accessories for easy installation
Before you decide to buy new turn signal models, it is important to take a close look at the previous turn signal attachment. While the old components are often fastened in large and rectangular holes with vibration-absorbing moulded parts and rubber plates or with stable click-stop brackets, new turn signal models are usually fastened with threaded pieces (M8 or M10). Therefore it is usually not possible to use the previous mounting parts. You have questions about our products? Then talk to us, we will gladly advise you!
Adapter & holder for motorcycle turn signals Seeing and being seen - in road traffic this plays a very important role. When it's dark, front and rear headlights make sure you have a good view...
read more » Close window Adapter & holder for motorcycle turn signals
Seeing and being seen - in road traffic this plays a very important role. When it's dark, front and rear headlights make sure you have a good view of the road. This enables you to assess the traffic situation quickly and correctly. Other road users also perceive you better through the lighting on your bike. While the headlights and taillights are always in action, the indicators are only used to indicate a change of lane or direction of travel. They are therefore essential components on every motor vehicle. However, the standard models do not always meet the optical requirements. Therefore we offer you different variants for conversion. And so that everything fits correctly, you will also find the matching indicator adapters in our range.
Motorcycle turn signals - which regulations apply?
The StVZO contains some regulations which must be fulfilled by turn signals. If you own a bike that was first registered after January 1, 1962, it requires four turn signals - known as direction indicators in the technical language.
It is important that other road users can easily see the flashing signal. For this reason, the German Road Traffic Licensing Regulations (StVZO) specify very clear dimensions for installation. Motorcycle turn signals may be installed at a height between 350 mm and 1,200 mm above the road surface. A distance of at least 340 mm must be allowed between the two indicators. The minimum distance between rear indicators is 240 mm.
If you use so-called ox eyes at the handlebar ends, rear indicators are also required on current motorcycles.
Original or accessory turn signals - which model is it allowed to be?
Usually the selection of the motorcycle turn signals is made according to optical aspects. In our shop you can get accessory turn signals in many shapes and from different materials.
If it comes to a defect in the turn signal system, you can choose a suitable replacement from us. The offer ranges from indicator glass to complete accessory indicators. Here it is important to pay attention to the mounting method. Is the direction indicator embedded in the fairing or can it only be mounted using a special mounting device? Many turn signal models in our shop can be used universally and across brands. If you want to replace all front and rear turn signals on your bike right away, we recommend buying a set. You can find suitable mountings and adapters in our shop.
From classic to sporty - accessory indicators & the right indicator mounting
Pilots of retro-style machines, choppers or cruisers often prefer round and large housing shapes for the direction indicators. But also models with a chrome-plated and pointed housing are real eye-catchers with which you can set great accents.
A sporty look goes well with touring and racing machines. So-called mini-flashers fit harmoniously into the design of the machine and are very inconspicuous when switched off. The appearance of the vehicle and your personal taste decide whether you prefer chrome-plated models or indicators completely in black. Elongated and triangular mini variants in carbon look additionally emphasize the sportiness of your motorcycle.
Almost indestructible and fully in trend - LED flashers from TecBike
No matter whether it concerns sporty mini indicators or whether it should be models in the hip retro look: As illuminants LEDs are very trendy. They are economical in energy consumption, very small and offer an optimal light output. And so that the change from the original to the accessory version from our range is easy, you will find robust and durable turn signal adapters.
License plate holders, which are combined with direction indicators, kill two birds with one stone. They meet the legal requirements and are optical highlights. Even if you prefer a very puristic and clean look on your bike, our range offers you a suitable selection for this as well.
Turn signal accessories for easy installation
Before you decide to buy new turn signal models, it is important to take a close look at the previous turn signal attachment. While the old components are often fastened in large and rectangular holes with vibration-absorbing moulded parts and rubber plates or with stable click-stop brackets, new turn signal models are usually fastened with threaded pieces (M8 or M10). Therefore it is usually not possible to use the previous mounting parts. You have questions about our products? Then talk to us, we will gladly advise you!
