Motorcycle protectors - From axle protectors to crash pads
When the going gets tough - high quality products for your motorcycle
Even the best rider is not immune to motorcycle crashes and falls. In order to make the involuntary sled ride for your bike easier, you will find a wide range of protectors and crash pads for popular brands like Kawasaki, Yamaha or Ducati in our shop. The products not only convince by their high quality, they also change the look of the motorcycles.
Crash pads, radiator guard or tank protector - Small motorcycle parts with a big effect
Almost like the famous sword of Damocles, the subject of falling hangs over every motorcyclist. One moment you are still firmly in the saddle, happily robbing the curves, the next moment you are already sliding over the asphalt of the road or whirling up the gravel along the racing track. In addition to the protectors that you, as a responsible biker, wear in your protective clothing, various attachments can mitigate the consequences of this involuntary divorce for your motorcycle. Damage will be reduced or even completely prevented.
Our range offers you crash pads not only for the different motorcycle brands, but also for different purposes. Enduro protectors as well as the pad set for the racing machine are part of the selection. These motorcycle parts are mushroom-shaped grinding protectors. Usually they are screwed on for a secure fit. They consist of plastic, carbon or a combination of aluminium and plastic. In the event of a fall or if the machine starts to slip, they prevent neither the frame, nor the cladding, the radiator or attachments from coming into contact with the ground. And very important is the protection of the motor housing. These motorcycle accessories are characterized by rounded contours. This is less the intention to give the pads a chic look. Thanks to the curves, the motorcycle can slide over manhole covers, for example, without getting caught in them. This can happen especially with angular pads.
The assembly of the protectors is simple. Various mounting points are already available on the frame. The parts are attached to them. Further attachment possibilities are special mounting kits with holding plates. If motorcycles are partially or fully faired, it may be necessary to cut or cut open the fairing so that the pads have enough space. The pads are registration-free and do not require an ABE.
Fork protectors, radiator grilles etc. - More protection against damage
Besides racingparts and motorcycle tuning we also offer high quality attachments (for example license plate holder, exhaust holder or similar) and stickers. In addition, you can expect a large selection of maintenance and repair. With our motorcycle parts a serial machine becomes a custom bike, which is completely tailored to your requirements.
Motorcycles are of course not only suitable for use on the road or in motor sports. Even away from the grey asphalt bands, two-wheelers and their pilots feel at home. The classic enduro, high-legged and lightly built, feels at home even in difficult terrain. When you "weed" through the terrain, stones, dirt and sand learn to fly. This often leads to unwanted contact with the radiator grille, the manifold or the engine housing. In order to keep the fun in the foreground and the functionality of your bike, you will find high quality Enduro protectors in our shop. The clutch protector or an additional radiator grille, as well as the motorcycle manifold protector help to protect your bike from stone chips or similar.
The Superbike - More racing than street bike
When the FIM Superbike World Championship for near-series motorcycles was held for the first time at the end of the 1980s, this also coined the term "Superbike". Among the leading manufacturers of fast two-wheelers in Europe are Ducati, BMW or Aprillia. Yamaha and Kawasaki belong to the most famous Asian vehicle manufacturers.
The Superbike also enjoys great popularity in professional motorsport. The strict technical regulations allow only minor deviations from the series machines. This reduces costs and offers a high power density. With our racing parts such as fork protectors or crash pads made of carbon you kill the famous two birds with one stone. Should it come to a fall, the motorcycle is protected. At the same time you put your own stamp on your companion.
Optimal protection for tank and paint - tuning parts and the tank protector from our TecBike-Shop
On a motorcycle, the tank is more than just a container to carry the fuel needed for the ride. It is an essential design element of your bike. It is therefore not surprising that special attention is paid to its paintwork. If sneaky metal parts like sharp-edged buttons or zippers of the station wagon leave ugly marks on the tank, it is extremely annoying. The sensitive paint surface can easily be protected from such things. The easiest way to do this is with a so-called tank protector. In our shop we offer you a wide range of different products. The tank protector made of carbon is available in different versions and is suitable for motorcycles of the brands
- Aprillia,
- Ducati,
- Honda,
- Kawasaki,
- Yamaha, Suzuki, Triumph etc. available
Racing accessories and motorcycle tuning for your custom bike
The so-called customizing, i.e. the individual conversion of a motorcycle, is extremely popular among two-wheelers. But not everything is allowed that pleases. All motorcycle parts from well-known manufacturers such as Gilles Tooling or R&G in our shop have an ABE (General Operating License) and/or a parts certificate from TÜV. Racing accessories, which are exclusively designed to be used on the race track, are not approved for regular road traffic.
Discover now our large motorcycle parts assortment and convince yourself of the high quality and the favourable price!
Motorcycle protectors - From axle protectors to crash pads When the going gets tough - high quality products for your motorcycle Even the best rider is not immune to motorcycle crashes and...
read more » Close window Motorcycle protectors - From axle protectors to crash pads
When the going gets tough - high quality products for your motorcycle
Even the best rider is not immune to motorcycle crashes and falls. In order to make the involuntary sled ride for your bike easier, you will find a wide range of protectors and crash pads for popular brands like Kawasaki, Yamaha or Ducati in our shop. The products not only convince by their high quality, they also change the look of the motorcycles.
Crash pads, radiator guard or tank protector - Small motorcycle parts with a big effect
Almost like the famous sword of Damocles, the subject of falling hangs over every motorcyclist. One moment you are still firmly in the saddle, happily robbing the curves, the next moment you are already sliding over the asphalt of the road or whirling up the gravel along the racing track. In addition to the protectors that you, as a responsible biker, wear in your protective clothing, various attachments can mitigate the consequences of this involuntary divorce for your motorcycle. Damage will be reduced or even completely prevented.
Our range offers you crash pads not only for the different motorcycle brands, but also for different purposes. Enduro protectors as well as the pad set for the racing machine are part of the selection. These motorcycle parts are mushroom-shaped grinding protectors. Usually they are screwed on for a secure fit. They consist of plastic, carbon or a combination of aluminium and plastic. In the event of a fall or if the machine starts to slip, they prevent neither the frame, nor the cladding, the radiator or attachments from coming into contact with the ground. And very important is the protection of the motor housing. These motorcycle accessories are characterized by rounded contours. This is less the intention to give the pads a chic look. Thanks to the curves, the motorcycle can slide over manhole covers, for example, without getting caught in them. This can happen especially with angular pads.
The assembly of the protectors is simple. Various mounting points are already available on the frame. The parts are attached to them. Further attachment possibilities are special mounting kits with holding plates. If motorcycles are partially or fully faired, it may be necessary to cut or cut open the fairing so that the pads have enough space. The pads are registration-free and do not require an ABE.
Fork protectors, radiator grilles etc. - More protection against damage
Besides racingparts and motorcycle tuning we also offer high quality attachments (for example license plate holder, exhaust holder or similar) and stickers. In addition, you can expect a large selection of maintenance and repair. With our motorcycle parts a serial machine becomes a custom bike, which is completely tailored to your requirements.
Motorcycles are of course not only suitable for use on the road or in motor sports. Even away from the grey asphalt bands, two-wheelers and their pilots feel at home. The classic enduro, high-legged and lightly built, feels at home even in difficult terrain. When you "weed" through the terrain, stones, dirt and sand learn to fly. This often leads to unwanted contact with the radiator grille, the manifold or the engine housing. In order to keep the fun in the foreground and the functionality of your bike, you will find high quality Enduro protectors in our shop. The clutch protector or an additional radiator grille, as well as the motorcycle manifold protector help to protect your bike from stone chips or similar.
The Superbike - More racing than street bike
When the FIM Superbike World Championship for near-series motorcycles was held for the first time at the end of the 1980s, this also coined the term "Superbike". Among the leading manufacturers of fast two-wheelers in Europe are Ducati, BMW or Aprillia. Yamaha and Kawasaki belong to the most famous Asian vehicle manufacturers.
The Superbike also enjoys great popularity in professional motorsport. The strict technical regulations allow only minor deviations from the series machines. This reduces costs and offers a high power density. With our racing parts such as fork protectors or crash pads made of carbon you kill the famous two birds with one stone. Should it come to a fall, the motorcycle is protected. At the same time you put your own stamp on your companion.
Optimal protection for tank and paint - tuning parts and the tank protector from our TecBike-Shop
On a motorcycle, the tank is more than just a container to carry the fuel needed for the ride. It is an essential design element of your bike. It is therefore not surprising that special attention is paid to its paintwork. If sneaky metal parts like sharp-edged buttons or zippers of the station wagon leave ugly marks on the tank, it is extremely annoying. The sensitive paint surface can easily be protected from such things. The easiest way to do this is with a so-called tank protector. In our shop we offer you a wide range of different products. The tank protector made of carbon is available in different versions and is suitable for motorcycles of the brands
- Aprillia,
- Ducati,
- Honda,
- Kawasaki,
- Yamaha, Suzuki, Triumph etc. available
Racing accessories and motorcycle tuning for your custom bike
The so-called customizing, i.e. the individual conversion of a motorcycle, is extremely popular among two-wheelers. But not everything is allowed that pleases. All motorcycle parts from well-known manufacturers such as Gilles Tooling or R&G in our shop have an ABE (General Operating License) and/or a parts certificate from TÜV. Racing accessories, which are exclusively designed to be used on the race track, are not approved for regular road traffic.
Discover now our large motorcycle parts assortment and convince yourself of the high quality and the favourable price!
